1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
Dismiss Notice
Share it!! Hit that Like Button! Tweet It!!

2016 Toyota Highlander Brake Fluid Reservoir Sensor Connector Recall G03

Discussion in 'Recalls' started by OishiiJPN, Nov 24, 2016.

  1. OishiiJPN

    OishiiJPN Administrator

    Subject: Safety (Noncompliance) Recall G03 – Remedy
    2016 Model Year Highlander Brake Fluid Reservoir Sensor Connector

    On October 21, 2016, Toyota filed a Noncompliance Information Report (NCIR) with the National Highway Traffic Safety Administration (NHTSA) informing the agency of our intent to conduct a voluntary Safety (Noncompliance) Recall on certain 2016 model year Highlander vehicles.

    Condition:
    On the involved vehicles, there is a possibility that the wire harness which attaches to the brake fluid reservoir sensor was not connected during the vehicle assembly process. If this were to occur, the vehicle would not meet a federal safety standard provision requiring a warning light if there is a drop in the brake fluid level. If a warning light does not come on to indicate a drop in fluid level, this could increase the risk of a crash.

    Remedy:
    Toyota dealers will inspect the brake fluid reservoir sensor wire harness and if necessary, connect the harness at NO CHARGE to the vehicle owner.

    Covered Vehicles:
    There are approximately 7,100 2016 Highlander vehicles covered by this Safety (Noncompliance) Recall. Approximately 40 vehicles involved in this Safety (Noncompliance) Recall were distributed to Puerto Rico.
     

Share This Page