2016-2019 Toyota Models Target Creation for TSS Forward Recognition Camera Adjustment Tech Tip T-TT-0515-18

MG

Moderator
Please see Tech Tip T-TT-0515-18
Also see Targets for 120mm, 160mm, 180mm below

APPLICABLE VEHICLES:
2016-2019 Toyota Models

CONDITION:
When adjusting the Forward Recognition Camera on vehicles with Toyota Safety Sense, it can be difficult to print the repair manual target to the proper size.

RECOMMENDATIONS:
Selecting the Proper Target – To ensure proper camera adjustment, the target should be printed to the specifications shown in the Repair Manual.
1. Refer to TIS, applicable model and model year Repair Manual: Engine / Hybrid System > Cruise Control > Front Camera > Adjustment.
Some vehicles may list instructions for a “One Time Recognition” and a “Sequential Recognition”. Determine which procedure you will perform and open the instructions.

2. In the Repair Manual, find the dimensions of the printed target size. The total horizontal dimension specifies which target to print

3. Print the correct sized target located in “Link References” below and confirm: a) The target is not blurry or distorted b) The target dimensions to ensure they are within +/-5 mm (0.197 in.) of the specified values.

Hint:
Open the file with Adobe Reader and select “Fit” in the print setting under “Page Sizing & Handling”

4. Complete the repair procedure as outlined in the repair manual.
 

Attachments

  • 120mm Target.pdf
    11.2 KB · Views: 313
  • 160mm Target.pdf
    19.9 KB · Views: 278
  • 180mm Target.pdf
    23.8 KB · Views: 327
Top